Han's Laser technology
Laser Flame Cutting (LFC)
Cut up to 9" carbon steel with your laser.

What Laser Flame Cutting is
Laser Flame Cutting combines laser cutting with oxyfuel cutting in one process on a Han's Laser cutting head. It cuts thick carbon steel consistently and with high quality using surprisingly low laser power, which significantly increases a standard laser's cutting capacity.
LFC is invented and patented by Han's Laser. It is available on the Han's Laser S-PRO large format laser cutting machines, sold and supported by Automated Cutting Machinery (ACM).
Thickness capacity with LFC
With LFC, a 12 kW Han's Laser cuts carbon steel up to 5" thick.
| Laser power | Max carbon steel thickness with LFC |
|---|---|
| 12 kW | Up to 5" (127 mm) |
| 20 kW | Up to 7" (178 mm) |
| 30 kW | Up to 9" (229 mm) |
In laser-assisted flame cutting mode, LFC cuts carbon steel up to 9" (229 mm) thick with no preheat.
Who it's for: plasma and plasma/oxyfuel shops
LFC puts laser within reach of shops that were ruled out by an occasional need for thick plate.
Many plasma and plasma/oxyfuel combination shops cut high volumes up to 1" (25 mm) or 1.5" (38 mm) thick. They occasionally need to cut 2", 3" or 4" (51, 76 or 102 mm) plate. These shops recognise that laser would bring significant speed and cost benefits on most of their work. Until now, lasers could not cut that heavy plate, so the laser process was not an option for them.
With LFC, a correctly configured laser with sufficient thickness capacity can cut material that was previously out of reach for a laser.
Right-sizing example: a customer who occasionally cuts 2.5" (64 mm) plate previously had to look at a 60 kW laser. With LFC, that thickness can be cut with as little as 12 kW. The customer can choose the wattage that fits the bulk of their cutting and avoid spending extra capital on an oversized laser.
Key benefits
- Cuts thick plate with low wattage: heavy carbon steel without an oversized, high-cost laser source.
- Right-sized capital spend: choose the wattage that suits the bulk of your work, not the occasional thick part.
- Straight cut edges and smooth cut surfaces in thick carbon steel.
- Fast piercing: the laser instantly preheats the material, eliminating oxyfuel preheat time.
- Bevel cutting of heavy plate for weld preparation (X, K, Y bevels and more).
- Stable, repeatable process delivering high-quality cuts.
- Easy to use: simple, quick-change consumables.
- Automated: pre-built cutting databases in the Han's Laser CNC, with automatic gas pressure control.
- Relatively inexpensive option compared with stepping up to a much larger laser.
How LFC compares with oxyfuel, plasma and pure laser
LFC pierces significantly faster than standard oxyfuel. The laser instantly preheats the material, so the preheat time normally required before an oxyfuel pierce is eliminated. The result is shorter cycle times on thick parts, especially on nests with many pierces.
Han's test data shows piercing times of 5–15 seconds on 2"–4" (50–100 mm) plate.
- vs. flame (oxyfuel) cutting: less slag and a narrower cut.
- vs. plasma: smoother edges and less smoke.
- vs. pure laser: lower running costs on heavy material.
Cut quality
- Taper (edge squareness): 0.2 mm or less on both sides on 1.6" and 3.5" (40 and 90 mm) plate, and 0.2 mm or less on one side on 4.7" (120 mm) plate.
- Smallest hole: about 0.4 × the plate thickness (for example, a 0.8" hole in 2" plate).
Beveling and controls
LFC bevels heavy plate for weld preparation, including A, V, X, Y and K bevels, cut in a single pass. Y and K bevels hold a uniform root depth.
- Bosch Rexroth CNC, customized by Han's Laser for the hybrid process.
- Built-in library of hybrid cutting parameters (pre-built databases).
- Autofocus and automatic, dynamic gas pressure control by the CNC.
- Sensors in the cutting head monitor lens temperature, focus position and gas pressure in real time.
- Consumables are simple and quick to change.
Videos
Cut samples






About Han's Laser
Han's Laser is the world's leading high-wattage laser manufacturer. It has built and installed more high-wattage lasers than any other company globally.
Han's Laser is vertically integrated, with the volume to design and manufacture its own laser cutting heads and technologies, including the patented LFC option.