AC Machinery
Hypertherm industrial plasma systems and parts in Canada
XPR, HPR and MAXPRO power supplies, plus the consumables and spare parts to keep them cutting.
3
Models we supply
2007
Serving Canada since
Cambridge, ON
Parts and service
Hypertherm plasma power supplies sit at the cutting end of a lot of the machines we sell. We supply the industrial side of the Hypertherm line: the X-Definition XPR range, the HyPerformance HPR range, and the LongLife MAXPRO200. These are the systems that mount on a cutting table. We do not sell the handheld Powermax cutters.
The part most shops care about more is what happens after the sale. We stock Hypertherm consumables and spare parts in Cambridge, Ontario, for XPR, HPR and MAXPRO systems alike, and our catalogue covers thousands of item numbers, from electrodes and nozzles through to the parts that fail rarely and stop production when they do. Those are the ones that are hardest to find in Canada, and they are the reason we hold the inventory we do.
Two more lines that are easy to miss, both supplied to order rather than held on the shelf. ProNest is Hypertherm's nesting software, and on most tables it decides how much of every sheet you actually use. Centricut laser consumables fit machines from a range of manufacturers, so we can often supply the consumable even where we did not supply the machine. Ask us for either.
The lineup
Hypertherm machines we carry in Canada
Grouped by what they do. Every one of these is quoted, installed, and serviced by our own team.
Plasma Power Supplies
See all Plasma Power Supplies at ACM
Plasma power supply
XPR170
The Hypertherm XPR170 is a mid-range precision plasma power supply from the XPR family. Delivering 170A of cutting power with X-Definition cut quality, it's ideal for fabrication shops that need high-quality plasma cuts without the capacity of larger systems. Part of Hypertherm's latest-generation XPR platform with advanced consumable technology and system diagnostics.
- Max cutting current
- 170A
- Cut quality
- X-Definition
- OEM
- Hypertherm
Plasma power supply
XPR300
The Hypertherm XPR300 is a next-generation plasma power supply that redefines what plasma can do. Delivering unmatched X-Definition cut quality on mild steel, stainless steel, and aluminum at up to 300A. Advanced power supply technology with rapid system feedback increases cut speed, dramatically improves productivity, and slashes operating costs. Consumable life is 3× competitor systems, with built-in WiFi for real-time monitoring and diagnostics.
- Max cutting current
- 300A
- Cut quality
- X-Definition on mild steel, stainless, aluminum
- Consumable life
- 3× competitor systems
- Connectivity
- Built-in WiFi
Plasma power supply
XPR460
The Hypertherm XPR460 is the most versatile and productive plasma power supply available. Delivering 460A of cutting power, it handles a wide range of metals and thicknesses with consistent cut quality across the full consumable life. Faster cutting speeds on mild steel than competitor systems, with X-Definition cut quality on stainless steel and aluminum. Pairs with Messer cutting machines for high-volume production environments.
- Max cutting current
- 460A
- Cut quality
- X-Definition on stainless and aluminum
- OEM
- Hypertherm
Why us
Why buy Hypertherm from AC Machinery
Consumables and spares in stock
Electrodes, nozzles, shields and swirl rings are the easy part. We hold them for XPR, HPR and MAXPRO systems, along with the parts that rarely fail, because those are the ones nobody else stocks and your machine is down until one arrives.
The industrial line, not the handheld one
X-Definition, High Definition and Conventional: the XPR, HPR and MAXPRO systems that mount on a cutting table. Which one you need depends on your thickness range and the edge quality your parts require, not just on amperage.
Integrated onto real tables
We do not sell the power supply in isolation. We specify it against the table, the controller, and the work it has to do, and we commission the whole thing.
Service behind the sale
Our technicians commission the system, train your operators, and come back when it needs attention. The same team every time.
FAQ
Hypertherm at AC Machinery: common questions
Answers to common questions about our hypertherm products.
We supply Hypertherm's industrial lines. X-Definition is the XPR range: XPR170, XPR300 and XPR460. High Definition is the HyPerformance HPR range, including the HPR400XD and the HPR800XD. Conventional is LongLife, including the MAXPRO200. These are the systems that mount on a cutting table, and we integrate them onto the tables we sell and service.
No. Powermax is Hypertherm's handheld air plasma range, and the systems we supply are the industrial ones that mount on a cutting table. If you need a handheld unit, a Hypertherm distributor covering that range is the right call.
Yes. We hold Hypertherm consumables and spare parts for XPR, HPR and MAXPRO systems in our warehouse in Cambridge, Ontario. You can search item numbers in our online parts catalogue and request a quote from there.
Yes. The HPR130XD and HPR260XD are out of production, and the installed base across Canada is large. We hold consumables and spare parts for them and we service them. Send us the model and serial number.
That is the part of our catalogue we are proudest of. We hold spare parts that rarely fail, precisely because they are hard to source when they do. Send us the item number and we will confirm stock and lead time.
It depends on your thickness range and the cut quality your parts require, not just on amperage. Tell us what you are cutting and how thick, and we will tell you where a smaller system is enough and where it is not.
Yes. ProNest is Hypertherm's CAD/CAM nesting software, and on most tables it has more effect on material cost than anything else you can change. Ask us for a quote or a walkthrough.
Yes. Centricut consumables fit laser machines from a range of manufacturers, so we can often supply the consumable even where we did not supply the machine. Send us the item number or the machine model.
Yes. We service Hypertherm plasma systems whether or not we supplied them, and we can retrofit newer cutting technology onto older tables. Send us the model and serial number.
Search our parts catalogue by item number or description and add what you need to a quote request. If you cannot find the number, send it to us and we will look it up.
Not sure which Hypertherm machine fits?
Ask our assistant about material, thickness, and volume. It knows the lineup and what we stock.