Fiber Laser Plasma Combination


FIBER LASER PLASMA COMBINATION

 

This machine combines Fiber laser with Plasma and you gain the best of both. With the most modern technology the unit is up-to-date. This laser is characterized as a robust and long-life design.

Messer Cutting Systems Fiber Laser utilizes a fiber optic cable for beam delivery and can be used in conjunction with the plasma process. By eliminating the need for mirrors, cleaning, alignment and replacement of mirrors becomes a thing of the past. The fiber laser process is three times more efficient compared to the common C02 Lasers and eliminates the need for a resonator thus no laser gas is required making cost of operation considerably less.

Internal holes smaller than a 1:1 ratio are now achievable, including sharper corners on squares and cleaner straighter holes. Previously this was impossible with only the plasma process. You now gain better part accuracy than “True Hole Technology” on .625″ (15.9mm) mild steel and below. Your parts can be cut using only one process or utilize both Fiber and Laser to maximize your production. The unitized machine design provides an extremely accurate machine platform and ease of installation.

The Shuttle Table incorporates servo drives on transfer and elevator stations allowing for combined transfer and elevation simultaneously reducing dead time and provides a base for additional material handling equipment such as “Smart Cranes” and “Tower Systems”.

Key Features:

  • Machine widths of 6′, 8′ and 10′
  • Machine lengths in 5′ increments from 10′ to 25′
  • Dual pallet shuttle table
  • 3/4″ and 2″ shuttle capacities
  • Machine frame with two independently driven Y-Axis carriages each with full plate coverage 1200 ipm rapid travel speed
  • Machine can be equipped with one Plasma, one Fiber laser head or two Plasma or two Fiber Laser heads (utilizes a beam splitter so only one Fiber laser source required)
  • Class one Laser enclosure with door interlocks for safety and machine access (Optional acoustic insulation reduces plasma sound level outside enclosure to 85 db)
  • Slagger® table standard for part drop and debris removal out of the table and enclosure
  • Cutting capability “FIBERBLADE Technology”
  • Fiber laser sizes of 2kw, 3kw, 4kw, 5kw and 6kw
  • Fiber Laser: MS .75″ (19mm) SS .5″ (13 mm) AL .5″ (13mm)
  • Plasma: MS 2″ (50mm) SS 1.75″ (44mm)
  • Achievable Fiber Laser cut part accuracy +/- 0.10 over 72″ (1.8m) area
  • Achievable Plasma cut part accuracy +/- 0.030 over 72″) (1.8m) area
  • Entire system completely integrated into the Global control Plus with on board macros, nesting and data bases for both Plasma and Laser