Three Position Oxyfuel Bevel Unit

MANUAL ROTATION WITH 3 POSITION (X OR Y-AXIS)

Three position Oxyfuel bevel unit

 

reqeest-a-quote-image

Manually adjusted Single Position Triple Torch Oxyfuel Bevel Cutter for straight line bevels with manual gas adjustment and manual ignition. Bevels can be cut in the X axis only. Height sensing is carried out by an electromechanical devise that rides on the plate.

The Three Position Oxyfuel Bevel Unit provides weld preparation edges and plate squaring in a single pass. Cutting a “V”, “Y”, or “K” cross section in one pass, the manually adjusted Triple Torch Oxyfuel Unit is designed to make a straight line bevel cut. It can cut in the longitudinal (X) axis or be used to bevel cut the ends of a plate (+j- Y) by manually rotating the unit +/- 90°. Height sensing is achieved by an electromechanical device that rides on the plate.

Key features:

  • Provides plate squaring and weld preparation edges
  • Bevel angles up to 45°
  • Torches may be adjusted from .375” to several inches apart using rack-able dovetail horizontal slides providing for a wide range of bevel angles that can be cut on a variety of material thicknesses
  • Height control is locked out when the electromechanical devise runs off the plate, maintaining proper height through the end of the cut
  • Capable of beveling in the X or Y axis by manually rotating the unit

 

Available on these Quality Cutting Machines